Трос сетка лоток

Material: Q235B Steel (Chinese standard steel), SS304, SS316 & SS316L Surface Finish: Electro zinc plated – for indoor use to BS EN 12329-2000, 12microns thick. Hot Dipped Galvanized – for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick Electrolytic Polishing – for stainless steel use Dimensions: Cable Tray dimensions are all internal. Depth of 50mm, 100mm &150mm Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm, 450mm, 500mm & 600mm. Length of 2997 fit max loading capacity in 40’ft containers. Wire Mesh Cable Trays are constructed with a 50mm x 100mm mesh configuration. Diameters of wires are 5.0mm. Installation Notice: Bends, Risers, T Junctions, Crosses & Reducers can be made from wire mesh cable tray straight sections flexibly in projects. Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. Wire Mesh Cable Tray systems can be safely employed in places where the temperature ranges between -40°C and +150°C without any change to their characteristics. Application: Wire Mesh Cable Trays are mainly used for low voltage, telecommunication, and fiber optic cables supported on short spans. Features & Advantages: All sharp ends are cut off to protect cables. Weight loading capacity is 27% stronger than traditional cable trays and cable ladders.