Три - D EM пайки машина

Three--D EM Soldering Machine 1. USE The three-dimensional EM soldering machine is used to make the multilayer flat net that the geonet product line produces, become the architectural honeycomb-like body 3-D geomat, after process such as inhibiting molding nice and warm, welding. This product is used as side slope protect engineering material, have already applied to the highway, railway, irrigation works, and so on. 2. Feature * The product line designs that reasonableness, structure is original, automation degree is high, operation is convenience; * Adopting drum-type molding structure, molding and getting into form are completed for one time , the length of getting into form is modifiable, this makes molding mass improve greatly. Compound welding is completed subsequently, the honeycomb-like bulging bag of molding guarantees that finalization of design will be reliable and not changing a place, welding is firm, so the product's appearance and mass improve by a wide margin. * The product line has cancelled the original hot oven and the way of using soldering board to add temperature, therefore, it controls temperature more simple and convenient. It has many merits, such as warm-up is prompt, the temperature is homogeneous, the control of temperature is good. Solder face's the control of temperature can reach ±0.5 degree. * Adopting this product line process flow to produce the Three-D Geomat, compared with the other handicraft, has these merits ,such as the investment of production line is small, basis net-piece is easy to produce or purchase , the cost of production is low, choice leeway is great. 3. Main Technical Data Main Motor Power: 1.5KW Rewinding Motor Power: 1.5KW Heating Power: 16KW Effective Molding Width: 2100 mm Maximal Width: 2000 mm Total Power: 19 KW Size (L*W*H):8500*2740*1650 mm