Трехфазный счетчик энергии Портативный Испытательное оборудование (Вт

Three Phase Energy Meter Portable Test Equipment(With Voltage source and Current Source) 1. Brief Introduction: KP-P3001-C three-phase portable test equipment with current and voltage source is an ideal device to test all kind three-phase energy meters accuracy below 0.2, especially for testing un-installed meters on site. The equipment can generate 3-phase voltage, 3-phase current and any power factor signal, the standard meter inside the equipment is class 0.05. The equipment is box structure, light, and easy to carry, it is very convenience to test meters on site, moreover the equipment can be used for repair meter in meter manufacture and as testing equipment in R&D institute. 2. Advantages: d. Displays of vector diagram for analysis of the supply conditions. e. DDS technology signal generator: The signal generator adopts digital sine wave composing technology. The signal generator can trace the voltage phase and supply a dummy load to the tested meter by outputting adjustable current with different phase ; f. High efficiency D-Class current amplifier and voltage amplifier: The equipment adopts PWM power amplifier(or we called D-Class amplifier), which is high efficiency (>85%) and very low heat consumption. The amplifier has protect function ,it can avoid damage due to wrong connection or other manual operations. Current amplifier and output shifter can output different current; Voltage amplifier can output different voltage; g. Large LCD screen display. 3. Main specification: Power and consumption: Power supply: 1P2W 220V ±10%, 50Hz or 60Hz; Max. consumption: 300VA Current source: Output current: 3×0. 1A-3×100A Adjusting resolution: 0.01% (min. 0.0001A) Power factor: 0 3600; resolution: 0.10 Output frequency: 45Hz 65Hz; Distortion(sine wave output): <0.5% Current stability of power source during sine wave output: 0.05% (180s) Output wave: sine wave 2-21 harmonic wave, total should be less than 40% Odd harmonic waveform Sub harmonic waveform Output capacity: 50VA per phase Voltage source: Load: The Load can be resistor / inductive / capacitance(<4uF) Adjusting resolution: 0.01% (min. 0.1V) Output frequency: 45Hz 65Hz; Distortion(sine wave output): <0.7% 10 Voltage stability of power source during sine wave output: 0.05% (180s) Output wave: sine wave 2-21 harmonic wave, total should be less than 40% Odd harmonic waveform Sub harmonic waveform Output capacity: 50VA per phase Build in Reference Meter: Voltage range: 3×30V-3×300V (AC) Current range: 3×0.001A-3×100A (20/100A current clip) (AC) Accuracy: Active power 0.05% (PF>0.5) Reactive power 0.1% (PF>0.5) Warm up time: < 2 minutes Build in Error Calculator: Impulse of tested meter could be: TTL / OC / Optical head Max. frequency of impulse could be: 200Hz Error display range: 0.001%-99.99%