Тороидальный трансформатор ядро ​​coreToroidal

A Series toroidal cores Cores can be manufactured in material thickness 0.35mm, 0.30mm, 0.27mm, 0.23mm, 0.10mm, 0.08mm and 0.05mm. Bare cores(not varnished), impregnated cores, epoxy coated cores produced according to customers specifications. SB Series toroidal cores SB series toroidal cores are developed to satisfy the customers who are eager to minimize their cost, which are wound by a continous silicon steels strip, occasioinally with joints. The appearance of the SB cores are very similar to traditional toroidal cores. Material thickness 0.20mm, 0.23mm, 0.27mm, 0.30mm and 0.35mm are available. The stacking factor is ranging from 0.94 to 0.96. The magnetic properties of SB series cores are very close to that of A series cores, the Bm values are relatively lower because it is recycle material. NB Series toroidal cores NB series toroidal cores are developed by Nicore to satisfy the customers who are eager to reduce their costs. The cores are wound of short silicon steel strips in 1 to 3 meters long. It is the particular feature of NB series cores to have joints in the flux path. Cores can be manufactured in material thickness 0.30mm, 0.27mm, 0.23m in following grades: Nicore GradeEquivalent GradeBm(gauss)NB140M4-0.30mm16000NB150M5-0.30mm15500NB160M6-0.35mm15000Bare cores(not varnished), impregnated cores, epoxy coated cores produced according to customers specifications. [If you could not see the picture clearly, please REFRESH this page.] [If you could not see the picture clearly, please REFRESH this page.] [If you could not see the picture clearly, please REFRESH this page.]