Точный цифровой измеритель LCR TH2819A

TH2819A is an updated product of TH2819 LCR meter with the features of TH2819, including easy operation, accurate and stable reading. It has smaller size than TH2819, nice appearance, and low cost. With test frequency from 20Hz to 200kHz, frequency resolution of 10mHz, wide test signal level range from 5mV to 2V, measurement speed up to 32ms/time, TH2819A can be used to inspect electronic components, not only for measurement parameters TH2819 has, but DCR measurement. The meter has 1.5V/2V internal bias voltage, optional ±10V (±100mA) and 1A internal DC bias source and external inductance bias sources to inspect inductive components. With high speed, wide test range, and 6-digit resolution, TH2819A can be used in quality control on production line, incoming inspection and lab measurement. Measurement functionMeasurement parameters|Z|, |Y|, C, L, X, B, R, G, D, Q, θ ,DCRBasic accuracy 0.1% Equivalents circuitSerial, ParallelMath functionAbsolute value deviation, percentage deviationRange modeAuto, Hold, ManualTrigger modeInternal, Manual, ExternalMeasurement time (≥1kHz)Fast: 32ms, Medium: 90ms, Slow: 650msAverage time1—255Delay time0—60s, with the step of 1msCorrectionOpen, Short, LoadMeasurement terminal5-terminalDisplay modeDirect, Δ, Δ%, V/I (voltage/current monitor) Display320×240 dot matrix graphic LCD display with 6-digit resolution Test signalTest signal frequency20 Hz-200 kHzFrequency min. resolution10mHzOutput impedance30 Ω, 100 ΩTest signal levelNormal: 5 mV-2 V Accuracy: 10%Constant level: 10 mV-1 V Accuracy: 5%Level min. resolution1mVDC bias sourceInternal0V, 1.5V, 2V, accuracy: 1%OptionalTH1902A 0-10V DC bias voltage, 0-100mA DC bias currentTH1902B 0-1A DC bias currentMeasurement display range|Z|, R, X0.00001 Ω — 99.9999 MΩDCR0.001 Ω — 99.9999 MΩ|Y|, G, B0.00001µS — 99.9999 SC0.00001 pF — 9.9999 F L0.00001 µH — 9999.99 H D0.00001 — 9.9999 Q0.00001 — 9999.9 θ (DEG)-179.999º — 179.999 º θ (RAD)-3.14159 — 3.14159 Δ%-999.999% — 999.999% OthersComparator10-bin sorting, bin counter Storage20 sets of LCRZ measurement settings saved InterfaceRS232C, HANDLER, GPIB (optional), USB HOST (optional)