Thermocol машины

EPS machine shape moulding machine with vacuum main frame of the machine adopts H steel welding and time effect process. It adopts key slot to orientation assemble and use precision line trace to replace the original four guide pin. This improvement made the run resistance smaller, precision stable and reliable. It makes running power decrease 60%. Hydraulic pressure motor power has been decreased from 7.5kw to 3kw. 2. The machine adopts face to face clip with two templates of four point lock framework. The power of lock-mould is from original 18T to 24T, greatly improving sealing quality of combined moulds, reduce the leakage of steam consumption. 3. By improving on the design of the steam pipelines, adopting the method of below inlet-steam to greatly increase the steam and drainage pipeline, so the flow of steam is much more matched with the principle of thermodynamics 4. Adopts fast-mould of the machine, for customers more convenient using and higher efficiency using. 5. Adopts combined shutter of de-mould frame, for easy installing the ejector. 6. Adopts big aluminum protective safety door, making the machine more beautiful. 7. The machine adopts multi-point, multi-channel balance control technology, so its close to international leading level; lower energy consumption, saving energy 40%, increasing productivity by 20%. The main components of the machine apply world-brands to combine a superior machine with an integrated system by electric, hydraulic and pneumatic. It keeps the machine operated reliably, low power consumption, long life and high production efficiency. 8. The machine adopts PLC and the man-machine interface of touch screen can set up the process of parameters, program. For the convenience of users, some important data has been already adjusted before delivery. It can also be reset by the programmer if its necessary. 9. The machine adopts pressure and time heating control. User can adjust it if necessary. 10. It adopts special hydraulic drive system, with separate oil cylinder as drive, lock, de-mould. Keep the same step by synchronization gear wheel to make more stable running. 11. The machine adopts pressurized filling system, complete sealed steel chamber with pneumatic control valve device, ensure filling and discharging credibility. CE certificate, ISO9001:2008