Термоэлектрические охлаждающие модули

Our company founded in 1992,Our product gets many patents, and have passed through ROHS and REACH detection, high-quality, good service and delivery are rapid. Matters needing attentions 1.The connecting surface between heating/cooling radiators and cooling components must be fine finishing,and thermal silicone grease must be daubed on the connecting surface homogeneously,so as to reduce thermal resistance.Never switch on power when the heating side is not connectde with the heating radiator. 2.The 127 series can be controlled within 12-13V,when the average temperature of the component rises in operation,the electric currency oill be lowde down. 3.The maximum temperature of tile thermal vitrolites shall be no more than 90°C.The lower the temperature on the thermal vitrolites,the better the cooling effect. Customer Type of the productsTEC1-12704 DimensionsThe following picture Element logarithm127 Lead standard20AWG UL1569 105°C Standard tinning wire,PVC insulation skin,Lead length 350±5mm,End department bare 7±1mm,Lead welds in heat surface one end resistance2.90 3.20Ω(Environmental temperature 23±1°C,1kHZ Ac) Biggest difference in temperatureΔTmax(Qc=0)65 68°C electric current Imax12VDC 3.2A,15.4VDC 4.1A Voltage Vmax15.4VDC Refrigeration power Qcmax36W(15.4VDC) Assembly to withstand the pressure39.2N/cm2 Work environment temperature scope-55°C 80°C Sealed704 silicon rubbers letteringHot surface Package standardFoam box,10 Box / carton,50 pieces / box Storage conditionsEnvironmental temperature -10°C 40°C,Relative humidity ≤80%,Ventilate and no corrosivity gas RemarksLead length and color may be asked according to customer to change Specifications TYPEHot side temperatuerDimensionsAbroad ModelTh=30°CΔTmax(Qc=0)(°C)Imax(A)Vmax(V)Qcmax(W)L(mm)B(mm)H(mm)TES1-1274068415.43630303.3CP1.0-127-05L