сырой край клиновидный ремень

raw edge vbelt with cog-shaped grooves on the bottom to enhance flexibility shile top and bottom parts are covered with rubber of fabricis exposed on sides. 1. Features: 1). Excellent durability and flexibility in driving; 2). Specially designed cords enhance durability and length stability; 3). Excellent in resistance against heat, oil and wear; 4). Can be used on small pulleys; 5). Show stable performance on high speed rotation. 2. ConstructionFunctionMaterialTop fabricprotects internal tension membercotton sythetic fabricTension memberprimary material for transferring powerpolyester, aramidCompression rubbermaintains sectional shape by side pressureCRBottom rubberabsorbs shock and prevent cracking in compression rubberNR, CR3.Application: Our raw edge belt has wide range of applications, especially inindustrial drives with high belt speeds and small pulley diameters. This new programme allows immediate improvement of existing drives which use wrapped belts, providing overall benefits with regards to economy as well as power transmission and reliability of operation. 4.Product description Our raw edge belt type with moulded cog which is temperature and oil resistant as well as antistatic. The belts are tolerance stable, such that belts with the same section and length marking can be used immediately in matched sets. The moulded cog provides high flexibility and a good fit in the pulley grooves as well as a lower operating temperature which increase belt life. Sectiontop width(mm)height(mm)length rabgeZX/10X106483-5000AX/13X138483-5000BX/17X1711584-5000CX/22X22141067-5000