Сварочного дыма экстрактор, высокого вакуума типа

LB-JF model High Vacuum Fume Purifier uses the advanced polyester micro filting technology. Its filtering efficiency for 0.2μm particles from welding, cutting and grinding can be up to 99.9% . Meantime it has very High Air Flowrate. This modle has many advantages such as low noise, stable performance, easy operating etc. Technical parameters: Air flow: 190m3 /h Power: 1.5KW Filter area: 8m2 Power: 380V/50Hz Size: 550 * 550 * 1110mm Max Pressure: 23000pa Noise: 65Db(A) Under the help of the fan device, the welding fume is sucked into inlet through multi-direction sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, and the left fume and dust is sucked into gravity separator. The bigger paticiles firstly descend into dust bag. The smaller particles is arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filter.. At last, the gas meets the required standards and enter into air or other required room. The activated carbon filtering can be optional upon customer’s request.