Сухой трансформатор 10-35KV

Features: Resin insulation dry-type power transformer is adopted the latest technology from German. We adopt Germany‘s filling and vacuum pouring technic and introduce into the latest pouring technic “Vacuum pressure pouring” to ensure the product’s quality. Features are as bellow, 1. Fireproof. Transformer is made from insulation material epoxy resin with fiberglass. It will not express electric arc cause short circuit. It can be installed at the load center. explosion-proof, fire-proof. 2. Economy. It can be installed near by the load center to reduce install fee and circuit energy consumption. 3. Maintenance-free, non-pollution. There is no oil in the transformer, no need to maintain, to save a lot of maintenance time and cost. 4. Moisture-proof. The coil does not absorb moisture,iron core and clamping piece can run normally under Severe environment like 100%relative humidity provided passing special technology Processing. The service intermittent doesn’t need moisture-proof processing. 5. Insulation. Low partial discharge, Anti-Short circuit, high lightning impulse level and large overload capability 6. Low loss, high efficiency, low service cost. Adapt long-run benefit. 7. Little noise, perfect heat radiation. Under the strong cold wind still have 150% over load capacity. 8. Anti thief. Copper coil be sealed by epoxy resin and fiberglass, it is hard to be blackout. 9. It can be fit out temperature display control device to ensure the transformer working.