Стекловолокно Мат из рубленого стекловолокна

Chopped Strand Mat is a non-woven reinforced material. It is manufactured by spreading continuous filament roving of 50mm in length, distributing it at random uniformly and holding together by polyester in powder form or emulsion form. Compatible resins and Applications Chopped Strand Mats are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are mainly used in hand lay-up, filament winding and compression molding processes. The typical end-use applications include Automotive ceiling upholstery, ship body, electric insulator, sanitary ware, seats, anti-corrosive pipe, storage tank, cooling tower, water tank, leaves of wind powder generation and so on. Packaging Each Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 90mm. The mat roll is wrapped up with plastic film, and then packed in a cardboard box or wrapped up with kraft paper. The rolls can be vertically or horizontally placed. For transportation, the rolls can be loaded into a container directly or on pallets. Storage Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the temperature and humidity should be always maintained at 15oC 35oC and 35oC 65oC respectively. These data, which are subject to change, are offered solely as a guide in the selection of reinforcement. The information contained in this publication is based on actual laboratory data and field test experience. We believe this information to be reliable, but do not guarantee its applicability to she users process or assume any liability arising out of its use or performance. Users of our products should make their own tests to determine the suitability of each such product for their particular purposes. Nothing contained in this brochure is to be understood as authorization or recommendation to infringe any patent or violate any law or safety code.