стекловолокна самоклеющиеся сетки

Performance as follows: Good performance of alkaline-resistance High tensile strength and deformation-resistance Excellent self-adhesive performance Simple and easy to be applied Application Pepair the cracks and johnts or holes of drywall,plasterboard,stucco;and repair other damages in other wall surface. Specification Width(mm) 25,35,48,50,100,150,200,1000,1500 or wider Length(m) 10,20,30,45,90,153 or longer Mass: 5085g/m Mesh: 7*7,8*8,or 9*9 mesh/inch Color: white, yellow, blue etc. Testing standard: ASTM-D579 Direction of application: 1. wall must be clean and dry 2. center and apply tape over the length of the joint, pressing firmly 3. apply a generous first coat of compound over the mesh, making sure to completely fill the joint crevice.when the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape. 4. let dry completely, then sand slightly. 5. apply sufficient thin finishing coats to produce a smooth wall surface. 6. cut or butted bards do not have a tapered edge. Therefore, special care must be taken to assure proper compound penetration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering. Caution 1. failure to completely fill the joint may result in cracking. 2. for best results,use a setting-type compound.