Стеклопакеты

Insulating glass comprises two or more plies of glass that are separated with aluminum spacer fully filled with desiccant, and the sides are sealed with high-strength sealant. Annealed clear glass, tinted glass, solar reflective glass, Low-E glass, laminated glass, tempered glass, heat-strengthened glass and curved glass, etc. can be used to form insulating glass according to demands. We are equipped with several fully automatic IGU production lines from Lisec of Austria. Quality float glass and high grade production components are used to ensure our IGU with the following functional performance characteristics: l. Thermal insulation: with low heat gain and heat loss value (low U value) 2. Light transmission: appropriate level of solar transmission and solar reflectance can be selected to meet the design and functional requirement. 3. Noise insulation: IGU can reduce noise level by 30 dB. With inert gas in-filled, a 5 dB further reduction can be achieved. 4. Condensing prevention: The IG units are designed to withstand down to -65 without condensing, far exceeding the National Requirement of -40. 5. Leak-proof: to ensure the IGU air tight, automatic bending machine is used for all four corners bending, with use of linear connector for the spacer. A dual seal system is adopted with PIB as primary seal, and silicone or polysulfide as secondary seal. We use advanced fully automatic IG production line from Lisec of Austria, with automatic production operations covering spacer bending, filling of desiccant, edge deletion of coated glass, glass assembly, filling with inert gas and application of primary and secondary sealants. Specification: Maximun size:2500*3500mm Minimun size:350*180mm Thickness:12-52mm Quality Standard: GB11944 EN1279