стали сэндвич-панели ламинатор

steel Sandwich panel laminating machine laminator for sandwich panel is a integrated production line which consist of a roll forming machine and a sandwich penal laminating system. The line can produce three types of panels: flat wall sandwich panel, push-in sandwich panel and corrugated sandwich panel. The suitable material is color steel sheet with thickness of 0.4mm-0.6mm, coil width 1200 mm. The yield strength is ≤235MPa. The inserted material is EPS (expansive polythene). Sandwich panel specification Length cutting length≥2 m Width Refer To profile drawing EPS Profile 1: Flat Sandwich Panel: 1200mm EPS Profile 2: Push-In Wall Sandwich Panel: 1150mm EPS Profile 3: Corrugated Sandwich Panel: 970mm Raw material specification Sheet thickness 0.40.6 mm sheet sheet should be flatness without wavy points, camber and twist Yield Strength≤235MPa Steel Sheet Max Width 1200 mm (coil width accuracy ±2mm) Coil ID Φ500 and Φ600 mm Coil OD Φ1000 mm Coil Max. Weight: 5 Ton EPS Block Specification Density ≥18/m3, Unstraightness for all sides ≤1mm/m, Curve ≤3mm/m,The surface of the EPS shall be even,Unevenness of the surface shall less than 1.5mm/m,length of single piece of EPS shall be ≥3m. EPS Block size (EPS material should be as per profile requirement, prepared by customer) Line Technical Parameters Line speed1000-3000mm/min Frequency conversion control NoteDepend on the glue brand, temperature, operators skill) Line lengthAbout 40 Meter Working height 1050 mmPanel output height Laminating effective length7.5 m Control Mode PLC frequency conversion control Total electric powerabout 42 KW Power 380V/3 phase/50 Hz Control voltage 24 V/110 V/220 V Air source 0.7 Mpa (prepared by customer) Suitable working temperature around 25 For more details,please do not hesitate to contact Ms Sindy.Mob:+86-132 0801 0152 trademanager:cn200019298