стальной трос пресс машина

YSB series of wire rope press is mechanotronics product and widely applies to all kinds of hoisting profession. The compression connection of the steel wire press has the merit of reliable, artistic and simple compared with the formerly inserting set. After the rupture test of the steel wire, which conforms to the national standard. YSB Series Wire Rope pressure set for the mechanical-electrical integration products. A wide range of lifting industry, the use of wire rope press-fit plug with those in the previous set, compared with more reliable, beautiful, simple, etc., by the breaking of the rope to pull the pilot, in full compliance with national standards. Two, Structure and characteristics of 1, It uses a mechanical and electrical design, to switch to a different mold, you can suppress the different specifications of wire rope, easy to operate and safe. 2, Dual control for hydraulic system, the overflow valve, magnetic contact on the pressure gauge can be accurately controlled. 3, Electric control parts of the low-voltage control, an increase of operating system security. 4, Pull the rope to suppress large, beautiful, fast, and a wire rope press-fit just a few minutes to complete, significantly reduced the labor intensity and improve the work efficiency. TypeYSB-300YSB-500YSB-1000YSB-2000Max Pressure3,000KN5,000KN10,000KN20;000KNMax Diameter when oneφ25mmφ32mmφ46mm65mmMax Diameter when multi pressingφ32mmφ42mmφ56mm81mmMax work pressure28Mpa28Mpa28Mpa38MpaMax shading70mm85mm185mm220mmOverall length1550mm1680mm2080mm2480mmOverall high161Omm1715mm1125mm2710mmOverall width600mm620mm2175mm1150mmThe up speed of piston4.8mm/sec3.6mm/secrapid up speed 29mm/sec0.4mm/secwork up speed 3.8mm/secThe down speed of piston25.1mm/sec22mm/sec24mm/sec3.2mm/secNet weight2250Kg3100Kg6745Kg13400KgColorBlue or GreenBlue