Steel plate wheel abrator is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shotblast cleaning) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced. It is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts. Technical Specification: Machine Model: QXY2500 1. Width of steel: 2500 mm 2. Inlet opening: 2500 * 600mm 3. Length of steel: 1200-12000 mm 4. Roller speed: 0-4 m/min 5. Max load of roller: 2000 kg/m 6. Thickness of plate: 5-60 mm 7. Quantity of turbine:6 sets 8. Motor power of turbine: 30 Kw * 10 9. Abrasive cleaning: rolling brush and blowing device 10. Dust collector: cartridge type dust collector 11. Power consumption:500 Kw 12. Painting cabinet: available 13. Paint drying cabinet: available 14. Surface roughness: Sa2.5 Turnkey project available. Steel plate after shot blasting: