Сплит давлением солнечного водонагревателя

Split pressurized solar water heater, solar collector, solar water heater 1. Glass tube size: 70mm-2000mm 2. Glass material: high-quality borosilicate glass 3. Wall thickness of tube: 2.5mm 4. Vacuum: 5×10-5 Pa 5. Absorbing coating: TiNox from Germany 6. Thermal expansion: 3.3 x 10-6 m/k 7. Stagnation temperature: 260 C 8. Mechanical hardness: 0.8 Mpa 9. Starting temperature: 25 C 10. Absorption coefficient: > 0.95 11. Emissivity: < 0.05 12. Temperature loss of tube: < 0.6W / m2K 13. Wind resistance: into 150 km/hour 14. Hail resistance: into 35mm Features 1) Absorber coating: TiNox imported from Germany 2) Copper heat pipes for rapid heat transfer. 3) Low maintenance effort. 4) Easy installation of single or multiple units. 5) Corrosion resistant silver brazed copper header. 6)Aluminum alloy frames. Item Type No. of SHCMV tubes Hot water output(L/C) Aperture area (m2) Working pressure (Mpa) Dia. & Len. (mm) of SHCMV tube Qty. per 20/40ft container CA-70-2000-10 10 130/60 1.37 0.6 70×2000 90/180 CA-70-2000-15 15 200/60 2.05 0.6 70×2000 58/116 CA-70-2000-20 20 250/60 2.73 0.6 70×2000 40/80