Солнечный контроллер WS-10A MPPT15 / 15A

Solar controller WS-MPPT15 12V/24V 10A/15A WS-MPPT15 15Asolar controller (also known as WELLSEE solar controller, solar charge controller, PV controller) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10%-30%. WELLSEE WS-MPPT solar controllers 10A--60A include 12V series, 24V series and 48V series. MPPT advantage: Maximum Power Point Tracking (MPPT in short) system is a system which allows PV panels to outputs more Power by adjusting working condition of the electrical module. In Figure1 A indicates that the ordinary controller, which makes PV battery work on 12V ,only outputs a power point of 53W (a general power point), B indicates that MPPT controller makes PV battery always work at the maximum power point, thus outputs the power point of 75W (the maximum power point). WELLSEE 10A/15A Solar controllerfeatures: Applicable to various types of batteries, MPPT function Microprocessor controller pulse width modulation (PWM) charging Temperature sensor battery charging compensation Overload protection (automatic restoration) Overcharge protection Short circuit protection (automatic restoration) , Thunder protection Reverse discharge protection Reverse polarity connection protection (automatic restoration) Under voltage protection MPPT principle: The maximum power point is mainly affected by the ambient temperature and the intensity of sunshine. The intensity of sunshine being constant, the maximum output power decreases with the rise of the temperature. The temperature being constant, when the sunshine intensifies, the open circuit voltage of PV battery basically keeps unchanged. But the short circuit current increases substantially, thus the maximum output power increases substantially. This WS-MPPT solar controller can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by about 30%. However, due to many different factors, such as the difference in solar panel making, the change the Sun illuminance, change in temperature, the efficiency of the controller etc., the actually available increased rate is 10%-30%. WELLSEE 10A/15A Solar controller Model WS-MPPT10WS-MPPT15Rated Voltage12V / 24V / 48VMax Load current10A15AInputvoltage range12V-20V / 24V-40V / 48V-80VLength≤1mCharge loop drop0.25VLength≤1mDischarge loop drop0.05VOver voltage protection17V / 34V / 68VFull charge cut13.7V / 27.4V / 54.8VLow voltage cut10.5V-11V /21V-22V /42V-43VTemperature compensation-3mv//cellNo load loss≤10mAMax wire area2.5 mm22.5mm2Ambient temperature--25°C---+55°C