Солнечное зарядное устройство для iPhone3G / 3GS

Solar charger for iphone 3g/3gs,4g JN-08 1). Electrical Characteristic 1. Lithium battery capacity: 3.7V/2000MAH 2. Output current: 0.7A (max) 3. Output Voltage: IP/DC= 5.10V±0.05V 4. Static current: <50Ua 5. Charging way: standard charging, trickle charge 50Ma, constant current 500mA±20Ma, constant voltage 4.1V, stop charging current 50Ma full charged voltage:4.15V 4.20V. 2). Product Description Solar charger is a device which convert sunlight into power directly, not only solar panel can convert light to energy and stored it into inner lithium battery but can be also charged by AC 110V-240V or laptop…… By output interface, you can recharge your mobile phone, digital camera, MP3, MP4 act. Whenever and wherever. It is specially an idea standby power for hiking and traveling. 3). Operating Instruction 1. Charging digital products: Start-up: press” PRESS” button for two seconds Indicate power capacity: short time press “PRESS” button Shut-down: press “on” button for two seconds at start-up state 2. Solar charging indication LED Charging with sunlight, LED turns red. Four blue LED lights on to indicate lithium capacity, from left to right LED indicate power capacity 25%50%75%100% respectively. Start up self-checking: the LED lights on by one from left to right and flash once then all lights off after 0.5 second, self-checking finished when LED display current power for three seconds. Without loading state: only one blue LED flash slowly (on for 0.5 second, off for 1 second) Loading state: blue LED light on constantly, this product will shut down when battery voltage smaller than 3.3V 3. INPUT Charging with AC: when you connected with AC (5V/1A), this product will jump into charging state, shut down output, the four blue LED lights on one by one from to right, the LED will stop lighting if charged to correspondent capacity. Charging with sunlight: Red LED on, luminosity controlled by sunlight intensity, the more intensity of sunlight, the brighter of LED, it is a float charging state controlled by inner IC, the blue LED will not show rolling indicate. 4. OUTPUT Start up: output open and no loading, correspondent blue LED to the power capacity will constant on. When the battery left 3.3V, discharge finished and everything off. If you short time press the “PRESS” button once during discharge. Rest correspondent capacity indicated LED on for three seconds then off, the one which still on indicate the current power capacity. Protection: when output current>1.5A (Ignore Peak), shut down output.