СО2-лазер основной платы, управления движением доска, CONTRO

co2 laser main board motion control board control system for all brands of laser machine. the quolity is high but inexpensive. good product. MPC 6515Leetro™ MPC6515, advanced stand-alone 3-axis motion controller designed for laser engraving and cutting applications. Incorporating the advanced Field Programmable Gate Array (FPGA) and a 32-bit DSP, MPC6515 provides dedicated motion control features. 1,Stand-Alone motion controller 2,Pulse frequency up to 7.5M Hz 3,3-axis card for stepper motors or digital servo motors 4,RS232 applicable for mainstream industrial touchscreen supporting Modbus communication protocol 5,Download data with USB flash disk or USB data cable 6,Transfer speed with USB data cable up to 500Kb/s 7,1-CH laser power on/off control output 8,1-CH laser PWM control output 9,Support 1or 2-CH independent power analog output 10,PWM preheat control 11,Uncapping protection 12,Flying-optics compensation MPC 6535 Leetro™ MPC6535 improves major performance compared to MPC6515 in (a). better motion control around the corner; (b). less interfering thanks to the aluminum case. MPC6535 is designed exclusively for the laser equipment. This high-performance controller is based on the hardware solution of DSP+FPGA.MPC 6535 Leetro™ MPC6535 improves major performance compared to MPC6515 in (a). better motion control around the corner; (b). less interfering thanks to the aluminum case. MPC6535 is designed exclusively for the laser equipment. This high-performance controller is based on the hardware solution of DSP+FPGA. 1,Stand-Alone motion controller 2,Pulse frequency up to 7.5M Hz 3,3-axis card for stepper motors or digital servo motors 4,RS232 applicable for mainstream industrial touchscreen supporting Modbus communication protocol 5,Download data with USB flash disk or USB data cable 6,Transfer speed with USB data cable up to 500Kb/s 7,1-CH laser power on/off control output 8,1-CH laser PWM control output 9,Support 1or 2-CH independent power analog output 10,PWM preheat control 11,Uncapping protection 12,Flying-optics compensation payment term: 30% in advance, 70% before shipment. MPC 6575The MPC6575 controller is a stand-alone close-loop control card specially designed for the servo control system of laser engraving and cutting machines. User can edit graphics, set parameters, and optimize path to develop a process file using computer. Copy the process file to USB stick, and load it to MPC6575 through the USB interface in the controller. Then Run the processing work with PAD03 control panel. 1,Stand-Alone mode ensure system reliability in harsh enviroment 2,Improved stability compared with PC-based system 3,2-3 axes linear interpolation and 2-axis circular interpolation 4,High speed multi-axis continuous contouring 5,Velocity look-ahead and trajector blending 6,Position compare and trigger output 7,Laser control is synchronized with the laser head motion 8,Advanced PWM laser power control 9,Distinct trajectory adaptability to machine framework 10,Laser power attenuation compensation 12,Laser power control mode options:0-5VDC,PWM or frequency 13,Seperated laser power contro for dual-head laser machine 14,User-selectable tickle pulse for R-F tube 15,Master/Slave USB interface ensure high speed data transferring 16,Working menory up to 128M 17,Advanced PID algorithm eliminate any cutting inaccuracy 18,Easy interface to any AC or DC motors with analogue 19,All digital inputs and outputs are 2500Vrms isolated will send one free if you can buy ten