СНУ-3D Электронные пневматические Оборудование нанесения порошковых красок

TPH-3D Series Electronic pneumatic powder spray equipment Main parameters Powder system TPH-31 voltage: AC220V±10%, DC24V 2 frequency: 50/60HZ 3 rating: 120W(AC220V), <72W(DC24V) 4 current: 1A(AC220V), <3A(DC24V) 5 protection category: IP52 System pressure 1 powder jet: 9mbar±1mbar 2 jet guard: 5mbar±0.5mbar Operating condition 1 temperature: 0-+40°c 2 relative humdity: ≤93%/+40°c 3altitude: ≤1000m Storage condition 1 temperature: -25-+80°c 2 relative humdity:≤93%+40°c 3 altitude: ≤1000m Powder application module 1 operating temperature: ≤+80°c Storage conditions1 relative humdity: ≤93%+40°c Compressor1 voltage: 3×AC220V ±10% or single-phase AC220V 2 frequency: 50HZ 3 connecting load: 370W 4 current: 0.97A three-phase, 2.8A single-phase 5 motor protection switch setting: 1A three-phase, 2.9A single-phase Features 1: Max printing speed can be up to 20000 sheets per hour 2: Thequantity of the powder, the length of paper and the width of the papercan be set and kept for reuse; 3:The quantity of the powder can be saved 70% with obvious less pollution to the printer and the environment; 4:Operating procedure display his symbol and graphics by theLCD or set by the digital tube and touch switch; it isconvenient to operate and intuitive; 5: Add the powder no need to stop the machine 6: The quantity of powder can be compensated automatically according to the printer's speed and the width of the paper 7: Modulare construction with optimum case of servicing 8: Spray bar mit circuit-jet spray nozzle provides a stable powder jet substantial reduction of the proportion of powder that sprays.