Skylite крыши Прозрачные панели

Skylite roof translucent panel Product Type Fireproofing FRP Mechanics Features High steel and high tenacity FRP. Resin Ingredient Adopting addictive fireproofing resin like FHH-1092 Fiber Intensity Non-alkali, non-twist, non-glue glass fiber. Surface Treatment Pasting film Meline301 Reinforced Bending Line Having anti-pull reinforced bending lines with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding) Glass Fiber Adopting Taian high- quality glass fiber, the content no less than 30%. Unit Weight 1800g/m² 2400g/m² 3050g/m² Nominal Thickness 1.2mm 1.5mm 2.0mm Heat Resistance Limit -60 to +130 Light Transmittance 75%±2% ( light green) 53%±2% (cream white) Anti- ultraviolet Rate 99% Tensile Strength 100Mpa Flexural Strength 180Mpa Cracking Elongation Rate 1.9% Pasteur Hardness ≥ 50 Thermal Expansion Coefficient 2.3×10¯5cm/cm/ Thermal Conductivity 0.18w/m°k Warranty 10 yearsThe Technical Standards of High-quality FRPGood tenacity. No cracking phenomenon when driving nails in roof installationHaving close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP is consistent with steel plate.Transmittance loss rate is low. No yellowing phenomenon after long term service.Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.Light through FRP assumes scattering shape and gentle.Bright and clean appearance, no distinct air bubble and cracking on FRP.Anti- ultraviolet and anti- chemistry corrosion.Anti- ageing and anti- pulverization.Long service life.