скопировать дистанционного

Model No.: DL-4005C Description:copy remote control for car/wireless remote control Product Detail:DL-4005C is a copy remote, not any copy machine needed, not need to open the case or learn from the receiver. It can be used directly once the copy is done. It can combine two remotes together and copy most of the wireless remotes in the market(for example, the remote control of home application, car, motorcycle, electric vehicle, rolling door, garage door, barriers etc)1. Application:Rolling door, garage door, electric vehicle, barrier, electric curtain etc.2. Feature: a. Super heterodyne working mode and SAW resonance. b. Frequency: 315, 433Mhz, customized frequency available. c. Copy IC: HT-12E, AX5326-3, AX5326-4, AX5026, PT2262, PT2242, HT600, ,HT680, HT6207, HT6010, HT6012, HT6014, MC145026, HT640, EV1527, EV527, PT22603. Copy method: a. Delete the original code. Before the copy, it is necessary to delete the original code of the copy remote. When we press the lock button on the copy remote, the LED will be on immediately, that means there is code in the copy remote, we need to delete this code first. The delete operation is as following: press the lock and unlock button at the same time for 2 seconds, the LED will flash and extinguish immediately, at this time, keep pressing the lock button, and release the unlock button, continue to press the unlock button for 3 times but within 3 seconds. When the LED flashes quickly, the code has been deleted. Now if you press any button, the LED will not flash immediately, that means the code has be deleted completely. b. Copy the remote. Make the remote to be copied and copy remote face to face, press the same button of the both remotes at the same time for 3 seconds, the LED will flash quickly, that means the code of this button has been learnt. Do the same operation for the other 3 buttons. It can even learn different code remote (same frequency) to one copy remote.Attention: during the learning, pls make two remotes as close as possible, press the button of the remote to be copied a little longer to make sure the code has been learnt successful. c. Recover if wrong operation. If the code was deleted accidently, you can press the car and red button at the same time for 3 seconds, when the LED flashes quickly, that means the accident delete code has been recovered already.