силиконовые HTV

EST produce:sliocne,silicon,silicone ink,silicone rubber,silicone HTV,silicone RTV,silicone LSR,Textile printing silicone ink Etc.. DESCRIPTION TE1254(N) is a one-component, acetoxy cure, semi-flowable silicone adhesive sealant which cures at room temperature with moisture in the air. This product bonds to most materials, such as metals, plastics, ceramics and glass without the use of primers. KEY FEATURES Primerless adhesion to many substrates Excellent high and low temperature resistance ; from -55°C to 200°C continuous operation Excellent weatherability, ozone and chemical resistance Excellent electrical insulation properties Many color variations ; Black Translucent, Grey and White Simple and easy-to-use; one component system APPLICATIONS A waterproof sealant for electrical and communication equipments Air-tight sealants for meters to keep out water and dust Windshield sealants for automobiles and ships Oil leakage preventive sealants for automobile engine parts Sealing and potting to equipments which require cold and heat resistance General adhesion for metals, glass, plastic, wooden, etc TYPICAL PROPERTY DATA ---------------------- (JIS K 6249) BOFORE CURING Appearance -------------------------------------------Non flowing past Colours-------------------------------------------------Gray Cure Type --------------------------------------------Acetoxy Specific Gravity at 25°C (g/ml)-------------------0.999 (standards ISO R 1183,DIN 53479,NMRPS 703) Flowability (mm*mm/10g)----------------------- - Viscosity (cs)--------------------------------------- - CURING Tack-free Time (min) (23°C, 50%)------------------7 Cured thickness after 48h (mm) (23°C, 50%)-----4.44 CURED PRODUCT Specific Gravity at 25°C (g/ml)-----------------------0.999 (standards ISO2781,ASTM D297,BS 903 Part A1) Shore A hardness-----------------------------------------24 (Standards ISO R868,DIN 53505,ASTM D 2240, BS 903 Part A7,NFT 46003,NMRPS 471) Tensile Strength (kg.f/c)--------------------------------10.6 (Standards ISO R37(H2),DIN 53504,ASTM D 412, BS903 Part A2,NFT 46002(H2),NMRPS 470) Elongtion at break (%)----------------------------------416 (Standards ISO R37(H2),DIN 53504,ASTM D 412, BS903 Part A2,NFT 46002(H2),NMRPS 470) Dieletric strength (KV/mm)-----------------------------23 (standards NF C 26225,ASTM D 419,IEC 243) Dieletric constant at 1 MHZ------------------------------3.5 (standards NF C 26230,ASTM D 150,IEC 250) Power factor at 1 KHZ ------------------------------------1.98x10-3 (standards NF C 26250,ASTM D 150,IEC 250) Volume resistivity,Ω.cm ----------------------------------1x10-15 (standards NF C 26215,ASTM D 257,IEC 93) Testing is performed in accordance with current EST material test methods, laboratory Typical property data values should not be use as specifications SPECIFICATION Typical product data values should not be used as specification. Assistance and specification are available by contacting YanTai E.S.T. silicone technoogy co.,LTD HANDLING AND SAFETY When solvent are used, proper safety precautions must be considered toxic and must be used only in well ventilated areas. USABLE LIFE AND STORAGE When stored at or below 25°C (77°F) in the original unopened containers, this product has a usable life of 12 months from the date of manufacture. CAUTION! 1.FOR INDUSTRIAL USE ONLY 2.This product is neither terted nor representde as suitable for medical or pharmaceutical uses. 3.Do not use this product for other than its intended use,or user shall bear responsibility for any problems. HANDLING PRECAUTIONS 1.Wear suitable protective goggles, respirator and gloves. 2.Use only where an adequate ventilation system is avallable to sxhaust poisonous gases. 3.After handling,wash face and hands very thoroughly. 4.Keep out of reach of children. 5.Store in a cool,dark and dry place. FIRST AID MEASURES 1.Inhalation:Remove to fresh air and get medical attention immediately. 2.Eye contact:Immediately flush eyes with plenty of water for at lest 15minutes.Get medical attention immediately. 3.Skin contact:Immediately flush skin with plenty of soop and water for at least15minutes.Get medical attention immediatly. 4.Ingestion:Induce vomiting and get medical attention immediately. 5.See material safety data sheet