Силиконовые экструдера машина

Techincal parameter A drum diameter:570mmB drum diameter:280mmMixing ratio7:1-14:1The hydraulic system: The scope of work pressure:8 14 Mpa Electric power:1.5kw Pneumatic system: the scope of work pressure: 0.4 0.6MpaElectric source380V 50HZPower4KWSealantsilicon/polysufide/polyurethaneDimension:900*1200*1800mmFeaturesExtruder surging is continuous and steady and the direction can be changeb stably.The quantity of extruder surging is large.The pressuer is high.it is very convenient to adjust the quantity of extruder surging.it is convenient to adjust ratio.The glue gun coats the mixed material on the working surface uniformly.It is light and easy handing.The facility maintenance is easy.The sealing elements can run well and increase of service life with out extra lunricant added into the pump.The operation is safe.It discharges automatically when it goes beyond the normal pressure.Structure The equipment from A, B plastic pumps, hydraulic systems, pneumatic systems, lifting bodies, such as rack and control box components.As follows: 1.Glue pump: AB group have their pump respectively,drived by hydraulic cylinder, and make movement back and forth.then inhaling glue and make it out..A,B gule pump is connected with pressing glue and glue palte,then link together with the rack. 2.A,B ratio of the components separately control A,B groups to achieve.The range of glue amount is bif,also easy operation 3hydraulic system: A, B driving force comes from the hydraulic system, A, B group are located in a plastic pump air movements, movements of the body by two cylinders of parallel and Beams through the body of their respective fixed link, one of its purposes is to be closed to the surface through the press of two-cylinder.The pressure from the size of adjustment clamps.: Second, when the need for plastic barrels, the cylinder Pressure can be set against. Leave the plastic barrels, to replace the new plastic barrels. 4.The control box: it have electronic, hydraulic, pneumatic and electrical components, control switch is on the panel.The parts introduction 1.The equipment input supply 380 V/50HZ2.Phase: 3 ,wire :4 Power: 4KW 3.The control box is equipped with "exigency stop switch," running in the event of a failure, should be "exigency stop switch" button, emergency shutdown,can use again after the trouble solved