Силиконовым гелем

Siliconegel for shock absorption purpose 1.Basic model: EX1010A/B, EX1005A/B 2.Product DescriptionSQUARE® EX1010A/B, EX1005A/B is suitable for pour molding and used for vibration-reducing purpose because their low stickiness and low Shores hardness.3.Key Features Excellent thermal and cold stability (-50centigrade 200centigrade) Have good fluidity and can immit into small gap Have a good shock absorption(vibration-reducing)effect Stable shrinkage rate Catalyzed by platinum, non-toxic and no peculiar smell Have electric capability when the electric filling is added The hardness and shock absorption property can be adjusted4.ApplicationSQUARE® EX1005A/B EX1010A/B is suitable for making insoles and heel cups.5.How to use:Ready-to-use mixturescomponent A and B are fed directly to pouring molding machine from the original containers by means of a metering end mixing unit called static mixer. The mixture at the mixing ratio 11 is poured molding at high temperature. Then solidified elastomer will be ok within several seconds.6.PackagingSQUARE® EX1005A/B EX1010A/B are available in 20kgs pails and 200kgs drums.7.Storage: Correctly stored in its original closed container at room temperature (max 27centigrade). SQUARE® EX1005A/B EX1010A/B has a shelf life of 180 days. The ready to use EX1005A/B should be kept tightly closed, if doesnt , it will affect the pot life.8.Typical properties: PropertyUnitEX1005A/BEX1010A/BAppearanceTransparentcolor can be changed, if neededTransparentcolor can be changed, if neededViscositymPa.sA:7800 B:780010000-15000mpa.SShore A hardness°A4 58Tear strengthKN/m3.23.2Tensile strengthMpa1.92Elongation at break%580600Compression set%1.64Mix ratioA:B=1:1A:B=1:1 or 100:5Curing Condition130centigradex10-15minutes 8Remarks: The products should be closed tightly, protected from light and moisture.