шаровая мельница, конусная мельница, мокрого типа шаровой мельницы

ball mill, cone ball mill, wet type ball mill Application: Ball mill is the key equipment for grinding after the crush process, and it is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics, it also can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. The ball mill is horizontal cylindrical rotation device, driven by brim gearwheel. There are two chambers and grid. Material goes into the first chamber through the feeding inlet. Inside the first chamber, there are stage liners and ripple liners as well as steel balls. The shell rotates so as to generate electricity, and this force brings ball to a certain height and then balls drop down by gravity, the impact is the grinding force to the material. After the primary grinding, materials go into the second chamber through segregate screen. In the second chamber, there are flat liners and steel ball. After the secondary grinding, material is discharged from the discharging mouth. Then the whole grinding process is ended. Structure of Ball mill: The machine is composed of feeding part, discharging part, turning part and driving part (reducer, small driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable working condition. Moreover, according to different materials and discharging methods, there are dry ball mills and wet ball mills for choice. Specification: Model Shell rotation speed(r/min) Ball load(t) Feeding size(mm) Discharging size(mm) Capacity Motor power(kw) Weight(t) (t/h) Ø900*1800 36-38 1.5 <=20 0.075-0.89 0.65-2 18.5 4.6 Ø900*3000 36 2.7 <=20 0.075-0.89 1.1-3.5 22 5.6 Ø1200*2400 36 3 <=25 0.075-0.6 1.5-4.8 30 12 Ø1200*3000 36 3.5 <=25 0.074-0.4 1.6-5 37 12.8 Ø1200*4500 32.4 5 <=25 0.074-0.4 1.6-5.8 55 13.8 Ø1500*3000 29.7 7.5 <=25 0.074-0.4 2-5 75 15.6 Ø1500*4500 27 11 <=25 0.074-0.4 3-6 110 21 Ø1500*5700 28 12 <=25 0.074-0.4 3.5-6 130 24.7 Ø1830*3000 25.4 11 <=25 0.074-0.4 4-10 130 28 Ø1830*4500 25.4 15 <=25 0.074-0.4 4.5-12 155 32 Ø1830*6400 24.1 21 <=25 0.074-0.4 6.5-15 210 34 Ø1830*7000 24.1 23 <=25 0.074-0.4 7.5-17 245 36 Ø2100*3000 23.7 15 <=25 0.074-0.4 6.5-36 155 34 Ø2100*4500 23.7 24 <=25 0.074-0.4 8-43 245 42 Ø2100*7000 23.7 26 <=25 0.074-0.4 8-48 280 50 Ø2200*4500 21.5 27 <=25 0.074-0.4 9-45 280 48.5 Ø2200*6500 21.7 35 <=25 0.074-0.4 14-26 380 52.8 Ø2200*7000 21.7 35 <=25 0.074-0.4 15-28 380 54 Ø2200*7500 21.7 35 <=25 0.074-0.4 15-30 380 56 Ø2400*3000 21 23 <=25 0.074-0.4 7-50 245 54 Ø2400*4500 21 30 <=25 0.074-0.4 8.5-60 320 65 Ø2700*4000 20.7 40 <=25 0.074-0.4 12-80 400 94 Ø2700*4500 20.7 48 <=25 0.074-0.4 12-90 430 102 Ø3200*4500 18 65 <=25 0.074-0.4 ----- 800 137 Note:The technical parameters are subject to change without notice!