Сетевой фильтр сигнал

The introduction of SP series signal surge protection base module 1.General The surge protection components of SPDs have no radioactive isotopes and usually consist of at least one voltage-limiting or voltage-switching (EMC), device, and sometimes of overcurrent-limiting components as well.SPDs,consisting of several stages, must be designed without blind spot, it as to be ensured that the different protective stages are coordinated to each other. Otherwise, the protective stages will respond only partially nd lead to faults within the surge protective device. 2.lightning protector Tcehnical parameter Model numberSP5SP12SP15SP24SP30SP48SP60SP110Nominal voltage:Un5V-12V-15V-24V-30V-48V-60V-110V-Max. continuous voltage:Uc6V-4.2V14.5V-10.2V17.8V-12.5V26.8V-18.9V34.8V-24.5V55.1V-38.9V65V-50V170V-130VNominal current:In1ANominal discharge current:In(8/20uS) 10KAMax. discharge current:Imax(8/20uS)20KAVoltage protective level:UpInCore/Core≤50V≤70V≤85V≤100V≤130V≤200V≤240V≤730V Core/PE≤45V≤60V≤70V≤80V≤80V≤120V≤150V≤400V Voltage protective level:Up1kv/μSCore/Core≤16V≤38V≤50V≤70V≤95V≤150V≤180V≤520V Core/PE≤8V≤19V≤25V≤35V≤50V≤75V≤90V≤260V Response time:tA≤1 ns≤25 nsResistance1Ω1.5Ω1.8Ω1.8Ω1.8Ω1.8Ω1.8Ω-Insertion loss≤0.3 dBWorking frequency≤10MHzDegree of protectionIP20Dimension90×14×65mmEnclosure materialPolyamide PA6.6Connectorscrew terminals Keywords: data surge protector,signal surge protection,signal surge arrester,data surge protector,signal surge protection,signal surge arrester,data surge protector,signal surge protection,signal surge arrester,data surge protector,signal surge protection,signal surge arrester,