Серия С-2 19 "дюймовый настольный электронный дело

Introduction Series CI-C enclosure is adapt to the desktop’s or portable application, can be used to set up varieties of user-defined equipment, such as electrical equipment case, testing equipment case, communication, and computer system. .Casted front frame designed; reliable and robust design .Excellent stability; suitable to be desktop’s or portable application .Extruded aluminum side plate; conductive and oxidation process on surface; groove on the side to be used as tackle of portable handle. .Easy to install; flexible; symmetrical designed to ensure flexible and changeable; various size can be selected; 19 “standard and irregular printed board modules can be installed; well cost performance; perfect choice to set up instrument desktop Picture of dimension Notice: The standard enclosure dimension of above table only for reference; there could be little discrepancy compared with actual size 1 The panel is made up of 2.5mm Aluminum board or sections; different size can be selected; multi-choice conformed to shielded or non shield standard. 2 The fastest customized production and supply 3 Optional accessories: pull-aid panel, handle, screw and moudle box 4 Total depths (D) and Total Width can be freely customized 5 Notice:The standard enclosure dimension of above table only for reference; there could be little discrepancy compared with actual size1 The panel is made up of 2.5mm Aluminum board or sections; different size can be selected; multi-choice conformed to shielded or non shield standard.2 The fastest customized production and supply3 Optional accessories: pull-aid panel, handle, screw and moudle box 4 Total depths (D) and Total Width can be freely customized Installation methods .A variety of installation methods, light aluminum material ; designed with one-time casting technique of front frame to keep solid; amplified accessories can be applied; standard European board or circuit module based on tray can be installed; excellent shield performance SidepanelNotes: .Side panel is casted by extruded aluminum alloy; plastic sprayed on surface (also can be treated with conductive oxidation on one side) .Left& right panel can be replaced by cooling hole plate or side plug-in board (except 2U) .Left& right panel can be punched plum-shaped cooling hole (should be noted in the purchasing order) Threaded insertand slide nuts Notes: .Can be inserted front& rear beam to fix the panel .Thread hole is M 2.5 .The holes spacing is 5.08mm Cover Case foot .Made by PC Injection molding; matt surface; 3 kind is available (small& big standing leg, round leg) .Each case has two standing leg and a pair of round leg as accessory .Load-carrying weight is about 25KG; big standing leg can be selected according to the weight .Different foot is available by different requirement .Round sucker leg can carry heavy carrying weight, sucker can prevent from slipping Connection Scheme for standard board and guide rail Connection between the base cover and left& right side plate Notes:1.5 or 2mm aluminum board .2 kind of assemble methods .Plate board fixed on front& rear beam .U shape board fixed on left and right side plate Reference for orderNotes:·Including all fastening piece ·Items With* are optional accessories, should be ordered separately·Round sucker legs should be noted in the order if required ·Each standing leg has two parts ·If carrying loaded required, bottom tray or midhorizontalrail can be selected