Серия О.А. DIN 24255 / EN733 конца всасывания центробежные

DIN 24255 /EN 733 End Suction Centrifugal pumps. We have rich experience of OEM production for many international brands across ITALY, SPAIN, USA,etc. The DIN 24255 /EN 733 end suction centrifugal pumps has been used widely in the following field. 1. Civil Engineering water supply. 2. HVAC Projects 3. Irrigation 4. Fire fighting. (DIN 24255 /EN 733 end suction centrifugal pumps) Design: Horizontal, single stage, and End suction centrifugal water pump with volute casing and back pull-out facility.Pump and Motor are separate components and connected to each other via flexible coupling. Maintenance is easy, the impeller, shaft and other rotating parts can be removalbe with no need to disconnect the suction and delivery pipes. Only four types of shaft and five types of bearing housing need to be used for all the models.So the broken parts can be easy to be interchanged. Spacer coupling is used to avoid the movement of driver or pump casing when the pump is on maintenance. (DIN 24255 /EN 733 end suction centrifugal pumps) Pumped Liguid: Thin, clean, non-aggressive and non-explosive liguids. Liguids should be free from large solid particles and fibres. (DIN 24255 /EN 733 end suction centrifugal pumps) Shaft Seal: 1. Gland Packing; lantern Ring is used for water sealing and lubrication of packing. 2. Mechnical Seal: Standard: Alloy-Alloy/Viton, other type can be choosed by the buyer. . (DIN 24255 /EN 733 end suction centrifugal pumps) Pumped Liguid: Thin, clean, non-aggressive and non-explosive liguids. Liguids should be free from large solid particles and fibres. (DIN 24255 /EN 733 end suction centrifugal pumps) Flange: DIN2332 PN10RF, Optional ANSI B16.5 Class 300lb. Technical Data: Flow: 2-1100m3/h Head: 2-150m Temperature: -10°C--150°C Operating Pressure: 10Bar, Optional 16Bar. (DIN 24255 /EN 733 end suction centrifugal pumps)