Серия MFJ9-YC мокрого типа AC электромагнитный клапан

Hydraulic valve solenoid ,wet typevalve solenoid. Tis series solenoid is applied to single-phase full wave rectifying AC power supply control circuits,which can reah 240 V ,as a power component of the Hydraulic solengoid directional valve .It used in NG6 and NG 10 screw conneced solenoid directional valve of YUKEN company Japan. MFJ9-26YCseries wet valve solengoid Specified voltage :AC 100 V /110 V / 200 V / 220 V / 240 V Specified suction: 26N Specified journey: 3mm Working oil pressure: 16MPa MFJ9-50YCseries wet valve solengoid Specified voltage :AC 100 V /110 V / 200 V / 220 V / 240 V Specified suction: 50N Specified journey: 4mm Working oil pressure: 16MPa Operating Notice Mode connection of solenoids is junction box.Thevoltage of junction box must meet whit the solenoid itself. The pushpin of the solenoid is used in adjustment or some times in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not stride it.The wallop can destroy the pushpin and the surface of the leading hold,orthe solenoid will leak oil or cannot prqosition. When solenoid is used in double directions,remember the solenoids cannot be energized at the same time in order to prevent the solenoids form burning. There is a protector of over-current between electrical control systems and solenoids,in order to prevent the solenoids and the electrical component form buming in improderly conditions.Explantion Of Sample If client have special requirements,we can dajust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body. Characteristic curve for reference only. The main perfonance parameter is obtained in the conditions of lab.Finally explanation and changing of the paramters by HUAXING. two kind picts Key Parameters Code