Сенсорный экран Тепловой насос водонагреватель контроллер

Heat Pump Water Heater Controller Main Function: 1. Temperature Display and Controlling It can display water tank temperature and outdoor machine temperature, and it can also control the temperature in water tank at the set temperature. 2. Auto Defrosting ControllingIt has defrosting controlling logic of heat pump optimization design, and can defrost effectively in order to ensure that the outdoor machine can run normally at low temperature, and it has the function of defrosting failure alarm. 3. Running in different period of time The controller has two modes: Autoand Econ, in Econmode, the controller can set 3 periods of time at most, it can only heat in these periods of time. 4. Leakage Protection If the leakage occurs, the controller will shut off all output. 5. OthersReal Time Clock, On-off State Memory When the power is off(Can be set), Direction of cross valve can be set, Boot delay protection of compressor, Sensor Error Alarm, High Temperature Alarm, Add Fluorin, Test and so on. Main Technique Index: Range of Temperature Display -50--150C Range of Temperature Set 0--100C Power Supply 220V±10%AC Operation EnvironmentTemperature -10--50,humidity ≤85%. Output Load Capability Compressor 10A/250VAC,Others 2A/250VAC