SC-NK400 Полуприцепы-серво Детские пеленки машина

MECHANICAL FEATURES: 1 Pulverizing Systemsmash the raw oar at a time. 2 Material feeding and macromolecule dispensing device are controlled by independent variable frequency. 3 Cotton core spoke (or mould wheel)forming and grid embossing device. 4 Elastic waist, front waist tapes and side waist tapes are available. 5 The main materials are wound by the driving shaft of constant tension control. It is controlled automatically in production and does not need to shut down or reduce the speed to change the rolls. With the automatic deviation device, it picks out the defects automatically. 6 The main material adopts pneumatic feeding shaft and automatic deviation-correcting device. 7 Front waist tapes can use forming material or spread (the draft can be cut as positioned) 8 Coating film is formed by PE film and non-woven fabrics. 9 Compact the product after compounding. 10 The machine is automatically controlled by PLC and the drive is control-led by variable frequency. 11 The operating desk is controlled by the touch screen.Man-machine conversation interface is designed in the operating terminal to realize figure digitalized control (setting of parameters ,production speed , shift output and trouble display). 12 Products arrangement output device. 13 Safety device is equipped in the operation panel. 14 Cuber is optional for customers. Technical Parameter: 01 Working Speed:350-450 piece of/minutes 02 Specification: XLLMS 03 The qualified rate of the produces reaches 97(excluding the waste products produced in materials changing or by the mixing machine) 04 overall power:150KW (excluding the glue machine and the air compressor )Power source:380V50HZ 05 Dimension: 19.5M×2.1M×2.8M (long×width×high)(As per requirement of the products)