Ручной стилус техника

Description of goods: First, the basic principle Press the lever on the solenoid switch, solenoid adsorbed on the printer head and the workpiece surface, the computer-controlled printing needle in X, Y two-dimensional plane by A certain trajectory, while the role of print in compressed air under the needle to do high-frequency shock motion to print out the user's aesthetic mark. Second, Introduction DQ series of hand-held tag printer using standard printer parallel interface to communicate with the computer, you can print a large workpiece plane. Third, characteristics and main functions 1, print legible, neat, printed words the same depth, the font is not deformed. 2, the words in English characters, numerals, any random by computer graphics can be input, scheduling. 3, can automatically number (serial number), VIN code printing. 4, print content can be automatically called and saved and automatically save the file to retain. 5, the network can automatically control the printing. 6, can automatically print bar codes. 7, print depth adjustable. Fourth, technical parameters 1, the print depth: word deep 0.1- 2mm (adjustable). 2, the print height: character size set by the user, the smallest not less than 1mm. 3 Print speed: 1-3 characters per second print (2 words shall prevail). 4, the print format: print or cambered 140 × 80 (according to parts required). 5, print the header height: ≤ 350. 6, frame size: 340 × 440. 7, the printer for the linear guide rail, a self-sealed self-lubricating function. 8, are printed material hardness: ≤ HRC50. 9, power supply: AC 220V ± 15%, total power 300W. 10, working pressure: 0.3- 0.8Mpa. 11, ambient temperature:-10C ° - +45 C °. Description of goods: First, the basic principle Press the lever on the solenoid switch, solenoid adsorbed on the printer head and the workpiece surface, the computer-controlled printing needle in X, Y two-dimensional plane by A certain trajectory, while the role of print in compressed air under the needle to do high-frequency shock motion to print out the user's aesthetic mark. Second, Introduction DQ series of hand-held tag printer using standard printer parallel interface to communicate with the computer, you can print a large workpiece plane. Third, characteristics and main functions 1, print legible, neat, printed words the same depth, the font is not deformed. 2, the words in English characters, numerals, any random by computer graphics can be input, scheduling. 3, can automatically number (serial number), VIN code printing. 4, print content can be automatically called and saved and automatically save the file to retain. 5, the network can automatically control the printing. 6, can automatically print bar codes. 7, print depth adjustable. Fourth, technical parameters 1, the print depth: word deep 0.1 - 2mm (adjustable). 2, the print height: character size set by the user, the smallest not less than 1mm. 3 Print speed: 1-3 characters per second print (2 words shall prevail). 4, the print format: print or cambered 140 × 80 (according to parts required). 5, print the header height: ≤ 350. 6, frame size: 340 × 440. 7, the printer for the linear guide rail, a self-sealed self-lubricating function. 8, are printed material hardness: ≤ HRC50. 9, power supply: AC 220V ± 15%, total power 300W. 10, working pressure: 0.3- 0.8Mpa. 11, ambient temperature:-10C ° - +45 C °.