Rubber Industrial шланг

Rubber Industrial Hose 1. CONSTRUCTIONS: This hose consists of an inner tube of oil synthetic rubber one or multilayer spiral fabric reinforcementsand an oil and weather resistant synthetic rubber cover.2. CHARACTERISTIC: This hose have almost no tolerance and they are capable of resistance to oil and water light small flexible and wear well. The minimum explosive pressure is fourfold to work pressure.3. APPLICATIONS: All kinds of steel wire (or suck) hose are made in suitable materials due to different purpose. Their advantages are logical design excellent quality durable. They are used to send or suck (under press) many kinds of liquid power solid etc. CommodityI.D(mm)DescriptionRemarksSteam Hose13-76Transport 170.C following saturation steam or cross hot water, working pressure steam 0.35MPa,hot water 0.8MPa Oil Hose13-152Suck and send petrol engine oil, lubricating oil and other mineral oil at room temperature. Working pressure is 0.5-1.2MPaCan also adopt the other armor structureFood Hose25-152Attract the milk type, drinks, edible oils and liquid beverage. Working pressure is 0.5-0.8MPa Acid or Alkali Hose25-300Send the rare acid, alkali solution at room temperature. Working pressure is 0.5-0.7MPaThe interior glue layer can adopt the man base glue while sending the dense acid, the cloth layer can adopt the glass fiber.Sandblast Hose25-300The wind pressure gushes out the sand and uses the hose. Working pressure is 0.6MPaThe tank wagon of cement is used and in charge of being can also be produced according to thisTank Elbow Pipe25-102The locomotive water tank inputs water to use Drilling Hose51-300Able to bear press, be wear-resisting, able to bear oil, use as well drilling machine Ti strength in charge of faucet with stand flexible union pipe to in charge of flange. Working pressure is 10-30MPaBoth ends have metal to connectNylon Fiber Spiral Oxygen Blowing Hose51-127The pure oxygen top-blown converter uses the flexible union pipe, working pressure is 1.5MPa, can also adopt the steel wire to weave the withholding type, working pressure can reach 8MPaThe metal flange of sulfide of both ends, there is asbestos anti abrasion layer outsideMud Piping Hose196-900The dredger is arranged (suck) the silt is used, working pressure is 0.4-0.5MPaThere can be flange to connect according to the need of designingHole Making25,32,40Make the hole to use in project buildings such as the bridge highway, etc., bear pulling force as 1.5-2.30Kg/root.The outer glue has good tearing the performance of drawing.