RSYB (S) Тепло Термоусадочная трубка

RSYB(S) Heat Shrinkable Tube Girth weld protection system for three-layer coated pipes 1. Description Construction: Three-layer system First layer: Liquid epoxy, solvent-free two-component Second layer: High shear strength copolymer adhesive Third layer: Radiation cross-linked polyethylene The RSYB(S) series is a tublar heat shrinkable sleeve which replicates the structure and performance of mill-applied three-layer PE coatings. RSYB(S) series also has excellent compatibility and has been extensively used on many other mill-applied coatings. 2. Features ---High mechanical strength and powerful aging resistance ---Good environment stress cracking resistance ---Excellent adhesion performance ---Convenient to use ---Satisfied with special standard or requirements 3. Application ---Oil & gas pipelines ---Water pipelines ---Compatible line coating: PE, FBE, Coal Tar ---Pipe size: 50.8mm 1524mm(2" 6") ---Operating temperature range: up to 80oC 4. Properties PropertiesRequirementTest MethodRSYB(S)RSYB(S)60RSYB(S)80 BackingTensile Strength (MPa) ≥17 ≥18.5 ≥18.5 ASTM D 638 Elongation at Break (%) ≥400 ≥600 ≥600 ASTM D 638 Heat Aging (150oC,168h) Tensile Strength (MPa) ≥14 ≥14 ≥14 ASTM D 638 Elongation (%) ≥300 ≥300 ≥300 Dielectric Strength (MV/m) ≥25 ≥25 ≥25 ASTM D 149 Volume Resistivity (Ω·m) ≥1×1013 ≥1×1013 ≥1×1013 ASTM D 257 Environmental Stress Cracking (F50) (h) ≥1000 ≥1000 ≥1000 ASTM D 1693 Vicat Soften Point (oC) ≥90 ≥90 ≥90 ASTM D 1525 Fracture Temperature (oC) <-65 <-65 <-65 ASTM D 746 Adhesive Ring & Ball Softening Point (oC) ≥90 ≥95 ≥100 ASTM E 28 Lap Shear (MPa) (23±2oC) ≥1.0 ≥1.0 ≥1.0 EN 12068 Lap Shear (N/mm2) (Tmax±2oC) ----- ≥0.05 ≥0.05 EN 12068 Sleeve Holiday Test15kV Pass Pass Pass EN 12068 Penetration Resistance No holidays @ 10kV No holidays @ 10kV No holidays @ 10kV ASTM G 17 Peel strength (N/cm) (23±2oC) ----- ≥50 ≥35 EN 12068 ≥70 ≥60 ≥45 ASTM D 1000 Peel strength (N/cm) (Tmax±2oC) ----- ≥5 ≥5 EN 12068 ≥15 ≥7 ≥7 ASTM D 1000 Impact Strength (23±3oC) (J) ≥15 ≥15 ≥15 EN 12068 Cathodic Disbonding Resistance (mm) ≤20 @ 23oC ≤20 @ 60oC ≤20 @ 80oC EN 12068 Hot Water Immersion (120d, @ Tmax ) No delamination, no blisters or water ingress No delamination, no blisters or water ingress No delamination, no blisters or water ingress ASTM D 870 5. How to order Standard ordering options RS Y B (S) 80 Φ1016 × 500 × 1.5 1.5-------Thickness of sleeve backing as supplied ------1.5mm(0.06"), 1.2mm(0.047") 500-------Sleeve width------ 300mm 900mm (12" 36") 1016-------Outside pipe diameter------50.8mm 1524mm (2" 60") 80-------Pipeline operating Temp------60(=60(140F)) 80(=80(176F)) RSYB(S) -------Heat shrinkable tubular sleeve for three-layer protection