RSPBJ (S) армированный Wrap-Around тепла Shrinka

RSPBJ(S) Fibre Re-inforced Wrap-around Heat Shrinkable Sleeve Fibre re-inforced heat shrinkable wrap-around sleeve for thermal insulation and oil & gas pipeline 1. Description Construction: Three-layer system or Two-layer system First layer: Liquid epoxy, solvent-free two-component (Two-layer system has no this layer) Second layer: High shear strength copolymer adhesive (First Layer of Two-layer system) Third layer: Radiation cross-linked, high density polyethylene with fibre re-inforced composite structure (Second Layer of Two-layer system) The RSPBJ system is a wrap-around fibre re-inforced heat shrinkable sleeve which replicates the structure and performance of mill-applied three-layer PE coatings. RSPBJ also has excellent compatibility and has been extensively used on many other mill-applied coatings. 2. Features ---High mechanical strength and powerful penetrating resistance ---Limitation of split propagation in case of external damage to the sleeve ---Excellent adhesion performance ---Convenient to use ---Satisfied with special standard or requirements 3. Application ---Oil & gas pipelines ---Thermal insulation pipelines ---Offshore pipelines ---Compatible line coating: PE, FBE, Coal Tar ---Pipe size: 50.8mm 1524mm(2" 6") ---Operating temperature range: up to 80oC 4. Properties PropertiesRequirementsTest MethodBackingBurst Strength (N) ≥2000 EN 12068 Heat Aging (150oC,168h) Burst Strength (N) ≥1700 EN 12068 Chemical Resistance (168h) (N) 0.1N HCl ≥1700 EN 12068 0.1N NaCl ≥1700 EN 12068 0.1N NaOH ≥1700 EN 12068 Environmental Stress Cracking (F50) (h) ≥1000 ASTM D 1693 Shrinkable Ratio of sleeve in Circumferential Direction (%) ≥15 ----- AdhesiveRing & Ball Softening Point (oC) ≥90 ASTM E 28 Lap Shear (MPa) (23±2oC) ≥1.0 EN 12068 SleeveHoliday Test15kV Pass EN 12068 Penetration Resistance No holidays @ 10kV ASTM G 17 Peel Strength (23±2oC) (N/cm) PE/PEPE/Primer SteelPE/FBE ≥70 ≥70 ≥70 ASTM D 1000 Peel Strength (50±2oC) (N/cm) PE/PEPE/Primer SteelPE/FBE ≥15 ≥15 ≥15 ASTM D 1000 Impact Strength (23±3oC) (J) ≥15 EN 12068 Cathodic Disbonding Resistance (mm) ≤20 @ Tmax±2oC EN 12068 Hot Water Immersion (120d, @ Tmax ) No delamination, no blisters or water ingress ASTM D 870 5. How to order Standard ordering options RS P B J (K) (S) Φ559 × 500 × 1.5 1.5-------Thickness of sleeve backing as supplied ------1.5mm(0.06"), 1.2mm(0.047") 500-------Sleeve width------ 300mm 900mm (12" 36") 559-------Outside pipe diameter------50.8mm 1524mm (2" 60") (S) -------Three layers protection------no "s" means two layer protection (K) -------Fibre re-inforced heat shrinkable sleeve fixed with stainless steel channel------RSPBJK RSPBJ ------- Fibre re-inforced heat shrinkable sleeve fixed with closure patch------RSPBJ