Россия термоусадочная рукав

Россия термоусадочная рукав

ориг. цена: 1,00 USD
Циндао, Китай
Циндао, Китай
Анонимный
86-532-80999083
Billy Gong
Контактное лицо

Основные данные

Бренд HSD
Место происхождения Shandong China (Mainland)
Номер Модели HSS-HSD-2010
Стандарт according to buyer's requirement...
Длина according to buyer's requirements
Толщина 2.2
Стандарт EN253-2003
Материал PE (Полиэтилен)
Russia heat shrinkable sleeve You're familiar with Qingdao Huashida, the industry leader in corrosion protection and sealing in CHINA. Advanced manufacturing plant; advanced technologies; advanced products; advanced performance..A series of heat shrinkable sleeve systems that provide superior corrosion protection (2-layer or 3-layer) of exposed steel of pre-insulated pipe on field applied girth-weld joints of buried, exposed and offshore pipelines operating up to 130ºC (266ºF).Field Joint Coatings1. HSD-WrapTwo-piece protective bulk roll with separate closureHSD-Wrap is a wrap arround sleeve with a separate closure designed for corrosion protection of buried and exposed steel pipelines. HSD-Wrap is supplied in bulk rolls consisting of a cross-linked polyethylene backing, coated with a protective heat activated adhesive. Once installed, the system effectively bonds and protects steel substrates and common main line pipe coatings including polyethylene and fusion bonded epoxy.• Just-in-time customized lengths allow bulk rolls to be field cut to protect any pipe size• Open sleeve configuration allows the product to be applied after the pipeline has been welded and cleaned• A broad range of operating temperature specific and soil stress resistant adhesives for project specific conditionsProduct description:Construction:2-layer system (2PE); First layer: Heat melt adhesive. Second layer: Radiation cross-linked, high density polyethylene film.The installation is carried out directly on the cleaned and dried (pre-heated) pipe surface without any primer being required. During installation, the heat shrinkable sleeve is wrapped and shrunk to form a tight fit around the joint. During recovery, the adhesive softens and flows to form a perfect bond with the pipe surface providing protection against corrosion. The radiation cross linked outer layer forms a tough barrier against mechanical damage and moisture transmission.Construction:3-layer system (3PE); First layer: Liquid epoxy.Second layer: Heat melt adhesive. Third layer: Radiation cross-linked, high density polyethylene film.This system is a wrap-around heat shrinkable sleeve which replicates the structure and performance of mill-applied three-layer PE coatings.During installation, the epoxy is applied to the prepared pipe surface and the heat shrinkable sleeve is immediately wrap around the joint over the wet epoxy. Heat is then applied to the sleeve which shrinks to form a tight fit around the joint. While curing, the epoxy forms strong mechanical and chemical bonds to the pipe surface & to the copolymer adhesive layer. The radiation cross linked outer layer forms a tough barrier against mechanical damage and moisture transmission. Reamark: The thickness mainly according to the buyer’s requirements.HSD-TUBETubular sleeve for pipeline corrosion protectionThe HSD-Tube is a heat shrinkable tubular sleeve designed for corrosion protection of buried and exposed steel pipelines. HSD-Tube consists of a cross-linked polyethylene backing, coated with a protective heat sensitive adhesive which effectively bonds to steel substrates and common pipeline coatings including polyethylene and fusion bonded epoxy.• A unique, factory constructed, tubular configuration allows for quickest installation time because less time is spent handling the sleeve and closure• A specially formulated adhesive bonds to common pipeline coatings and is engineered for demanding conditions.Product thicknessBacking1.0mm1.2mm1.2mm1.2mmAdhesive1.0mm1.0mm1.0mm1.2mmReamark: The thickness mainly according to the buyer’s requirements. Product width 100mm, 150mm, 200mm, 300mm, 450mm, 500mm, 600mm, 650mm(The pipe diameter should more than 400mm if the width of sleeve less than 300mm)Technical DataITEMStandardUNITDataAdhesivesoftening pointASTM E 28°C70-80shear strengthDIN 30 672N/cm≥100Basicspecific densityASTM D792r/cm30.935-0.96tensile strengthASTM D638Mpa15-20Elongation at breakASTM D792%350hardnessASTM D2240ball48Heat Shrinkable Sleevepeel strengthASTM D1000N/cm>150water-intake rateASTM D570%0.05

Условия поставки и упаковка

Packaging Detail: packed in polymer bag Delivery Detail: according to buyer's opinion
Порт: Qingdao,China

Условия оплаты

Электронный перевод

Фотографии

    Восстановление пароля
    Для восстановления пароля, введите пожалуйста ниже емаил, на который производилась регистрация:
    Код для сброса пароля был выслан на указанный Вами Email
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    Произошла ошибка. Пожалуйста, проверьте введенные Емаил и повторите попытку.
    Ваш новый пароль:

    Имя не заполнено


    Выберите страну доставки

    Вы не написали сообщение

    Нажимая на кнопку "Отправить" Вы даете нам свое согласие на использование указанных Вами здесь данных для обработки Вашего запроса. Передача данных третьим лицам исключена.

    Ваше сообщение отправлено!

    Закрыть

    1
    Рынок B2B
    Сбросить Закрыть
      Показать все свернуть
        Регион поиска
        По всему миру
        Категории
          Наименование позиций