RGB высокой мощности Светодиодный прожектор

RGB High Power LED Underwater light,(4-wire and 3-loop) Welcome to use our 4-wire and 3 loop RGB high power LED underwater light. The high power LED underwater light is one of the lighting fixture used in water and is composed of high power LED. It is widely used in fountain pool, theme park and the underwater lighting. Its brightness and colorful lighting effect mixed by R G B beautify the environment and ornament the city. LED underwater light adopts aluminum alloy shell, the seal of the light is reliable. The body of light and round type base is connected by the bracket that the light angle and light position spot light can be 360°adjustment. So it will easy to get the best spot location and get the most satisfy lighting effects. The underwater light adopts 4-pin connectors which connect to 4-wire and 3-loop controller to realize many pcs lights’ colour changing such as chasing, gradually changing, holistic changing etc..(More details to see Function Instruction). Specification Parameter: 1. Part No. UW1003 2. Size: L262*W208*H155MM 3. Net Weight: 2.6kg 4. LED Quantity: high power LED(R6 G6 B6) 5. Beam angle: 50degree 6. Shell Material: Aluminum alloy 7. IP Rank: IP68 8. Connector: 4-pin rubber naked wire 9. Rate power:19W 10. Rate voltage: DC24V Control way Underwater light can be matched with our company’s DMX controller or 4-wire and 3-loop controller (More details refer to the instructions) The 4-wire and 3-loop controller with remote which can be used to select the light pattern in the stand alone mode, total 13 patterns. They also can be set coding address to receive three-channel DMX signal and adjust the brightness of R .G. B Noted: The drive capability of the controller is limited. For example, 24V 10 RGB controller can max control 240W (=24V*10A) underwater lamp. For max power 19W RGB underwater lamp, the controller can max control 12pcs (240/19≈12). If you want to control more underwater lamps, you should add RGB amplifier before connecting more underwater lamps. The optional of power supply The total output of underwater lamps multiplied by the safety coefficient 1.35 is equal to the total output of switch power supply. (If the result is not a normal output, please choose a close power of switching power supply) Photometric performance Standard light output(Testing base on 28°C of the environment ) ColorVoltage(V)Power(W)Luminous(Lm)Lighting efficiency(Lm/W)White color24V19451.118.4Red color24V6.4160.424.3Green color24V7.3244.833.5Blue color24V7.362.88.6 ILLUMINATION Lx color 1M2M3M4M5MWhite color182054020013090Red color530156624027Green color 13103651308255Blue color10026127.14.5