RFID считыватель модуль

Access Control RFID reader module Vitto L298s reader module with Legic chip set Uses Legic chipset as the main technology Provides all the necessary functions and connects for the customer's to build their own R/W reader Modules: SC2560 Reader configuration: Provides an on-board serial port, which allows the customer to configure the reader easily such as reading segment, card data format and reader outputModule function: Reader module has input and output terminals or solder points, which provides flexibilities to customers to build their own R/W readerInput function: Power supply: 9 to 13V DC Yellow and green LEDs input terminal or solder points, which allow outside panel to control on-board LEDs output Buzzer input terminal or solder point, which allows outside panel to control the ob-board buzzer if required Serial port allows customer to program the reader moduleOutput function: Wiegand output 3 LEDs on-board which are red, yellow and green If R/W is required, customer can use serial connection to the R/W of Legic cardEnvironmental protection: Supports environmental control, all components being used inside reader are "lead-free"Technical specifications: Model: 298S Typical read range: 5 to 10cm Standard output format: Wiegand ISO standard (read UID): 15693 and 14443A Read other RF UID: Legic, iClass and inside R/W: Legic prime and Advent