Резиновых изделий

1,Trade Mark: AOBO RUBBER2,Standard: DIN, AS, JISK, ISO, etc.3,Usage: Widely used in mining, power plant, construction, port, metallurgy, chemistry, and food industries.4,Character: NN (nylon/nylon) conveyor belt: High tensile strength, high impact resistance, less bending fatigue, good trough ability, lightweight, less stretch, strong adhesion and less ply separation, high resistance to water suitable for medium, long distance and heavy-load transportation of materials.5,Nylon conveyor belt type It is divided into the conventional type , heat resistant type, and flame resistant type, cold resistant type, acid & alkali resistant type, and oil resistant type according to the performance of the cover rubber.6,Nylon conveyor belt specification; (1)Material of belt core: Nylon, NN100,NN150,NN200,NN300,NN400,NN500 (2)Side Wall Conveyor Belt Width: 100mm-2200mm (3)Layer of cloth; layer from 2 to 10 (4)Side Wall Conveyor Belt Cover rubber; top side: 1.5-8mm bottom side:0mm-4.5mm Specification and technical date of multi-ply nylon conveyor belt Fabric type Fabric structure Fabric specs Ply thickness (mm/p) Strength series(N/mm) Cover rubber thickness(mm) Width (mm) Length (m) Warp Weft 2ply 3ply 4ply 5ply 6ply Upper Lower Nylon (NN) Nylon (NN) Nylon (NN) NN-100 0.75 200 300 400 500 600 1.5 8 0 4.5 400 1800 ≤300 NN-150 0.80 300 450 600 750 900 NN-200 0.90 400 600 800 1000 1200 500 1800 NN-250 1.15 500 750 1000 1250 1500 NN-300 1.25 900 1200 1500 1800 NN-400 1.45 1600 2000 2400 800 1800 NN-500 1.55 2000 2500 3000 Nylon conveyor belt physical mechanical propertiesPerformance level of the cover layersymbolThe tensile strength shall be no less thanRate of elongation at break shall be no less thanAbrasion wear mm3 shall be no more thanMpaKgf/cm2Heavy;H24240450120Common;D18180400100Light;L15150350200Layer to layer adhesion strengthIndicatorsInter-layersInter layer between Cover layer and belt carcass0.8-1.5mm Thickness of cover layer0.8-1.5mm>1.5mm Thickness of cover layer more than 1.5mmAverage value of the specimens, N/mm, no less than4.53.23.5Min. peak value of the specimens, N/mm, no less than3.92.42.9