RCRG-2 высокого напряжения изоляционное покрытие

high voltage insulation sleevingmade by Beijing Nobbel Electrical Tech Develop Co., Ltd. is used for enabling the high voltage conductor to pass through a wall or a floor, and insulating the conductor from them. It is usually used in a indoor power station etc. The high voltage insulation sleeving is different from other similar products at home and abroad. With reasonable design, novelty structure, aesthetic configuration and silicon rubber outer insulation sleeve umbrella group, the wall bushing has no oil, no ceramic, no gas, is convenient for operation and maintenance. 1. Advantages: Dry-type insulationNo oilfilling, no gasfilling, no ceramicHigh ability of antipollutionEasy operation and maintenance 2. Type FCRG 2 L 1 / 2 F: organic composite insulation C: wall bushing R: capacitive insulation G: dry-type and silicon rubber 2: Serial no L: with CT (busbar-type Current transformer) 1: rated voltage, kV 2: rated current, A 3. service conditions Ambient air temperature: –50 centigrade +50 centigrade The altitude ≤1000m,if higher,amend according to IEC 60137 The creepage ratio20mm/kV, 25mm/kV or 31mm/kV 4. Technical indexes Rated voltage ( Ur ): 33kV, 52kV, 72.5kV, 123kV, 145kV, 170kV, 245kV Rated current ( Ir ): ≤4000A Partial discharge: ≤5pC Dielectric dissipation factor: ≤0.004 Ith: 25Ir All parameters are in accordance with IEC 60137