распыления стенд

THE SPRAY BOOTH: ModelGL5External size (m)7.0×5.6×3.5Internal size (m)6.9x3.9x2.7Entrance width(M)3Entrance height(M)2.66Fan capacity(m3/h)30000Air velocity (m/s)0.3-0.5Power (kw)25Vehicle suitedsaloon car --wall panel: sandwich style, g=50mm, polystyrene.rock wool available as required. --basement: steel structure, full grids,ramp: 2 pcs of grids. --door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. -- lengthen room as optional: outside size: 7.6*5.6*3.5(m) inside size:7.5*3.9*2.7(m) -- one 11kw intake fan and one 11kw exhaust fan. -- 4m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends. --1 manual VCD exhaust damper, electrical VCD as optional. one pressure meter. -- spraying/baking transition damper, automatically air controlled. --heat exchanger: stainless steel. riello g20 burner. --roof filter: 6 pcs of filter, mounted above support frame, which is made of steel and powder coated. --5 pcs of floor filter and 2 pcs of outlet filter. --upper light: 10 sets, 4*40w per set. side lights: 8sets, 4*40w. --control box: imported components, overload, overheat, phase-lacking, phase-locking protection, engine y/ start. --automatically stop when preset time is up. --constant temperature spraying. --environmental filter :the equipment can be adopted m style activated carbon or drawer style activated