ПВХ Клей

PVCGlue is especially suitable for rigid PVC pipe, U-PVC pipe, CPVC pipe and pipe fittings of inlet pipeline and drainage pipeline and also for ABS polymethyl-methacrylate. It has many fine characteristic, such as the pressure resistance, heat-resisting, acid and alkali resisting. 1. Moderate viscosity: solid content ≥15%, viscosity≥700mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline.≤3.2. High viscosity: solid content ≥20%, viscosity≥1000mpa.s, It is transparent and ropy liquid. It is applied to bonding PVC pipeline≥3.The glue should be stored in cool, dry and ventilated places with cover sealed. Keep awaySample Name PVC GlueBase Figure Test ItemsExamine Definite ValueAppearanceClear , Transparent, Light yellow thick liquidSolid Content (%) ≥20Viscosity(25,MPA.s) 1200-1500PH value 6-8Peel Strengthen(25*48h,canvas-canvas N/2.5cm)≥6.2 Drying Time5-25minutes25 Shelf Life18months Direction:1. Use sandpaper to make the surface of pipe or pipe fitting rough, chamfered edge.2. The grease, smirch of the contacted surface must be cleaned off by acetone.3.Both sides of the material must be applied the glue. The inserting side of pipeline reverses 90°, in order to make its contact face have well-proportioned glue, then positioning.4. This U-PVC glue confirms to the technical standard of GB3024-82.Storage:The glue should be stored in cool, dry and ventilated places with cover sealed. Keep away from high temperature and fire. The container should be sealed tightly.