Проволока Группа - окно

Wire Partition - window: 1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing 2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes 3) Horizontal frame: 1 x 1/2" cold rolled steel channels 4) All joints are mortised and tenoned 5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire mesh at 3'6" from floor, additional bar required for 12' high partition 6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C. 7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes 8) Floor sockets: cast aluminum 9) Door frame: 1-1/4 x 1/2" cold rolled steel channel 10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a galvanized steel box track and one steel channel bottom guide 11) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame 12) Locking clasps arranged for padlocking or cylinder mortise lock outside with recessed knob inside available 13) All partitions have 3" sweep space and include hardware and accessories for proper installation, specify partition to wall connection hardware separately 14) Surface finish: one shop coat gray powder coated