Проводимость контроллер (CM-230)

Conductivity Controller 1. features This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. Its an ideal auxiliary instrument of various types of small pure water equipment. 2. Main technical specifications Measurement range: 0 20 0 200 0 2000μS/cm Accuracy 1.5% (FS) Stability ±2 × 10-3 (FS) / 24h Auxiliary electrode Plastic structure; constant: 1.0cm-1 Temperature compensation componentNTC Thread dimension 1/2pipe thread Medium pressure 0 0.5Mpa Cable composition Quad cable, copper mesh and foil shielded plastic jacket Cable length 5m or on other agreement (5 30m) Temperature compensation Automatic compensation, with 25 as the reference temperature Display 3.5-bit LCD Power supply AC 220V ±10% 50Hz Power consumption ≤1W Environment conditions (1) Temperature: 5 50 (2) Humidity: ≤85%RH Dimensions 48 × 96 × 100mm (height × width × depth) Slot dimensions for installation45 × 91mm (height × width)