пропорциональна термостат

proportional thermostat,0-10VDC output, Function: Detect and Display room temperature Room temperature setting Fahrenheit or Celsius degree display Timing sleep Control On/Off of cooling and heating equipment single speed or three speed fan control Specifications: Set temperature range: 0 - 99.5º C adjustable Accuracy displayed: 0.1º C Accuracy: ± 0.5º C Rated Power: < 1 W Sensor type: NTC Display: LCD Power: AC 24V± 10%, 50Hz/60Hz Output signal: AC 24V× 2 (0.5A resistive), 0 - 10VDC(5mA) / 4 - 20mA (600Ω) Input signal: Dry contact (NO) Dimensions: 86× 86× 23mm (W× H× D) Fixing screw width: 60mm (Standard) Parameter Description Default Range Step 1 Power on status (0: Off; 1: On; 2: Hold) 2 0 - 2 2 Fan speed (0: Single Speed; 1: Three Speed) 1 0 - 1 3 Fan mode (DA; DB) 0 4 Sensor selection (0: Internal; 1: Remote) 1 0 - 1 5 Temperature format (0: Celsius; 1: Fahrenheit) 0 0 - 1 0.1 6 Temperature calibration 0 -20.0--+ 20.0 0.1 7 Minimum setpoint 5°C / 41°F 0 - 99.5 0.5 8 Maximum setpoint 35°C /96°F 0 - 99.5 0.5 9 Dead band (from HL8102E to HL8102K) 2 0 - 10 0.5 10 Heating & Auto sleep setpoint 7°C / 45°F 0 - 99.5 0.5 11 Cooling sleep setpoint 28°C /82°F 0 - 99.5 0.5 12 Comms# (HL8102XN) 1 1 - 32 1 Input Signal Mode 0: Invalid 13 1: Changeover(from HL 8102A to HL8102D) 0 0 - 3 2: thermostat will be sleep without input signal 3: thermostat will be Off without input signal 14 Heating reset time 90 sec. 10 - 300 sec. 10 sec. 15 Cooling reset time 90 sec. 10 - 300 sec. 10 sec. 16 Ports mode (0: Modulation & Floating; 1: On/Off) 0 0 - 1 17 Valve status as turn off (0: Close; 1:Hold; 2: Open ) 0 0 - 2 18 Port1 Modulation direction(0:10V Open; 1:10V Close) 0 0 - 1 19 Port1 Modulation minimum signal 0Bit 0-128Bit(5V/10mA) 0.04V/Bit(0.08mA/Bit) 20 Port1 Modulation proportional 2 1 - 20 0.5 21 Port2 Modulation direction(0:10V Open;1:10V Close) 0 0 - 1 22 Port2 Modulation minimum Signal 0 Bit 0-128Bit(5V/10mA) 0.04V/Bit(0.08mA/Bit) 23 Port2 Modulation proportional 2 1 - 20 0.5 24 Port1 Floating minimum time 1 sec. 1 - 9 sec. 1 sec. 25 Port1 Floating maximum time 30 sec. 10 - 300 sec. 10 sec. 26 Port1 Floating minimum time 1 sec. 1-9 sec. 1 sec. 27 Port1 Floating maximum time 30 sec. 10 - 300 sec. 10 sec. 28 Disable / Enable bypass PID control ( 0: Disable; 1: Enable ) 0 0 - 1 29 Override output value when bypass PID control Display output value when enable PID control 0 - 255 30 Override output value when bypass PID control Display output value when enable PID control 0 - 255 31 Input signal management: 0: Input valid 1: Override Input: open 0 0 - 2 2: Override Input: close 32 Display room temperature or set-point 0: Room temperature 1: Set-Point 0 0 - 1