Прокладка ПТФЭ

PTFE gasket PTFE Gasket Specification: Description:WFY 3410 PTFE Gasket is molded or skived or cut from virgin PTFE powder or compounds, sheets, rods, tube etc. It has the best chemical corrosion resistance among known plastics. Without being aging, lowest friction coefficient, wear resistance. The unloaded operating temperature range is -180 +260C.CONSTRUCTION: WFY3410F is PTFE gasket used filler materials such as glass fiber, carbon fiber and graphite etc. The filled PTFE has improved compression strength, better abrasion resistance, high thermal conductivity and lower thermal expansion compared with pure PTFE products. Several types of PTFE gaskets are produced to meet the most demanding application. APPLICATION: WFY PTFE offers a wide range of compounded products with good mechanical properties, electrical properties, thermal properties, chemical resistance, low friction coefficient and good resistance to wear. They can be mostly used in valve seats, bearings, requested to resin sliding and chemicals, elastic band for unlubricated compressors. An extended range of improved mechanical and processing properties can be additionally reached by combination of virgin PTFE and different fillers. Different combination offers a variety of different properties described in the following table. Filler Improved properties Glass Enhance wear resistance Chemical resistance Graphite Extremely low coefficient of friction Fairly good compressive strength Good wear resistance Carbon Good thermal resistance Resistance to deformation Bronze Enhanced compressive strength Good wear resistance High thermal conductivity