Профиль

1.IntroductionHanger is one of open suspended ceiling styles,which creats direction sense of sight. Functional elements can be installed easlily without any modification on the ceiling for the wide space between hangers.2.Materials& StructureAA1100 H24 Height (mm):100Width(mm):25 Length (mm): 1000 6000 Thickness (mm):1.0 2.0 The hangers are snapped in galvanized special profiles used for Hanger. The main runner profile is hung on beam-columns by adjusting nuts. The space between hangers is standard width.3. Surface TreatmentPU coated by Roller Coater Acrylics coated by Electrostatic Spraying Equipment Polyesterpowder coated by Electrostatic Spraying Equipment4. FeatureGlisten Easy Assembly Good Ventilation 5.ApplicationOur hangers are used in such areas as airport, subway, bus station, commerical center, hotel, restaurant, hospital, exhibition hall, shop center,etc.6.Installation1.Draw level line in the direction of horizontal and vertical. 2.Hang up main runner profiles (Series 38 or 50) in proper distance.The average space between the profiles is 1 1.2 m and the space between suspenders depends on the profile. 3.Connect the special profiles for Hangers with main runner profiles vertically and check for level.The average space between the profiles is 1 m. 4.Snap hangers in the profile.The space between ends of hangers must be 10mm or 20mm.Dust hangers off after finishing installation. (This way is for reference only.)