PP-R трубы производственной линии - Экструзионная линия -Plasti

PPR Pipe Production Line-Plastic Machine-ExtruderBrief Introduction This production line has production capacity of turning out 16mm-Φ160mm PPR pipe continuously with assembling the special high-speed single screw extruder, which is distinguishingly designed with co-extrusion die head; the production speed can reach 20m/min. The PPR pipe made by this facility has such features of smooth on sides, weak internal stress, anti-corrosion, antibiosis, shock resistance, aging resistance, no leakage, light weight, economic investment, and convenient application and so on. This facility can also be used to produce the HDPE silicone core pipePB pipePE pipePEX pipe, etc. The economic and technical norms of the finished products are all reached the international standards after been detected by National Chemical Construction test center, which are the first choices to replace the traditional galvanized pipe and applicable to so many fields, such as conveying the hot and cold watercentral-heatingand floor heating. Main technical parameters Model ItemSJ-30 SJ-45 SJ-65 SJ-90 SJ-120 SJ-150 L/D 25/33 25/33 25/33 25/33 25/33 25/33 Main motor power(KW) 2.2-7.5 7.5-22 18.5-55 55-185 90-280 110-300 Heating power(KW) 5-8 6-12 12-18 16-40 20-60 30-80 Cooling mode Wind &water coolingMax. extruding capacity 18 60 180 450 650 950 marking line extruderproduction line